Crystalyte

Specification for the solar inverter / controller / charger :

It is the key component of solar energy photovoltaic system. A good charge controller, could change battery according to the strength of

sunlight. It should make solar energy photovoltaic home system collecting as much energy as possible, that means, charge conversion rate should be high; second is able to change according to the load power, indicating under voltage, over current, short circuit and alarm. Therefore, choosing a good charge control system is important to use.

Inverter devices:

Output of solar panel is DC power, under normal circumstances, DC can be directly connected to the use of the load; but when there is a need alternating current, it is necessary to convert DC to AC.

Inverter output is generally AC 220V or AC 110V.

Controller / Inverter  : 24V 10A

LCD Display : Charge status / AC out put / Under voltage / Temperature

Sockets

1. Top Cover Socket :

- Solar panels input socket x 2pcs

- Temperature sensor connector

2. Bottom cover : 

- 1 x Battery connection + Battery cable with connector

- 1 x System switch On / Off

- 2 x AC output sockets / 110VAC or 220VAC